New
Integrated Pallet system for direct loading of workpiece inside machine with spindle gripper
Pallet ChangersOur integrated Pallet changing system is installed on the right side of U-Series. A gripper in the main spindle for the machine is loaded from the tool magazin and can pick the workpiece from the pallet and move it into the clamping chuck mounted on the table. Finished parts are brought back and stored in the pallet.
- Direct pick and place of blank and finishd parts from pallet to clamping position and back
- different grippers in tool magazine possible for mechanical, magnetic or vacuum clamping
- flexible by fully integrated programming surface on SPINNER-operator panel of the machine
Pallet Load | 661.4 lb | 300 kg |
Pallet-L | 15.75" | 400.05 mm |
Pallet-W | 11.81" | 299.97 mm |